| WPS 4" |
|
|
|
|
|
| Pump Diameter |
|
|
|
|
|
| m3/h
@ best point of pump efficiency |
|
|
|
|
|
All the internal and external metal components of the pump are constructed of stainless steel throughout and are cold pressed from stainless steel.
The bearings and the neck rings are made of special high nutrile content rubber to ensure excellent resistance to wear and abrasion by sand suspended in the well water.
Applications
• Domestic and general water supply
• Sprinkler and drip irrigation systems
• Pressure boosting
• Fire fighting systems
• Fountains and water displays
• Lowering of groundwater level
Construction Features
• Coupling and flange suitable for motors with pump mounting
dimensions in accordance with NEMA standards
• Jam free check valve, built into discharge chamber,
designed for low head losses
• Generously dimensioned intermediate bearings
located at each pump stage to align the shaft,
specially designed to optimize lubrication
• Easy to replace wear-rings and bearings
• Rugged cable guard
• Hydraulic profiles are optimized for high efficiency
• Resistance to corrosion and abration, i.e. the same inherent
qualities of stainless steel
• Very strong constuction: minimum thickness of 1mm
stainless steel, 6 spot welds on each vane, special top
bearing for every pump, very rugged coupling on the shaft,
4 straps ...
• Easy disassembly and assembly